- PH: +91 8828443924
- Email: Response@ShrinithaFurnace.Com
Muffle Furnace Manufacturer & Supplier in Delhi
Delhi, Delhi
Shrinitha Scientific is a muffle furnace manufacturer supplying laboratories and industries across Delhi. Every furnace is built at our own manufacturing unit in Vasai East, Maharashtra, tested before dispatch, and delivered to Delhi with installation guidance and spares support.
Delhi and the NCR combine national research laboratories such as CSIR-NPL, DRDO labs and IIT Delhi with large industrial areas in Okhla, Bawana and Naraina, the auto belt in Gurugram and Manesar, electronics manufacturing in Noida, and busy jewellery markets. Many of them need a reliable muffle furnace for ashing, loss on ignition, calcination, sintering and heat treatment. We supply 1200°C, 1700°C and 1800°C muffle furnaces with digital PID or programmable controllers, built to the chamber size and heating cycle your work needs.
What is a Muffle Furnace?
A muffle furnace is an electrically heated, insulated chamber furnace in which the sample is heated without coming into contact with the heating elements or combustion products. That isolation gives clean, uniform and repeatable heating — which is why it is the standard instrument for ash determination, loss on ignition and high-temperature sample preparation.
Muffle Furnace Models Supplied in Delhi
Kanthal-wire heated. The everyday choice for ashing, loss on ignition, drying and routine QC.
MoSi2 heating elements for sintering, ceramic firing and high-temperature material research.
Top-end MoSi2 model for advanced ceramics, zirconia and alumina sintering and R&D work.
Prices shown are starting prices for the base configuration, ex-works Vasai, excluding GST. Final price depends on chamber size, controller and options. Each furnace is made to order and dispatched in 7–21 working days; delivery to Delhi takes 4–6 days and is included in the quote. As furnaces are custom-built, returns are not accepted; manufacturing defects are covered under our service support.
Who Uses Our Muffle Furnaces in Delhi
Universities & research institutes
Calcination, sintering, annealing and teaching labs at IIT Delhi, NPL and Delhi University.
Aerospace & defence
Heat treatment of alloy coupons and materials QC at DRDO laboratories.
Automotive & component makers
Hardening and tempering of small parts and binder burn-off trials in Gurugram, Manesar and Faridabad.
Electronics & semiconductor R&D
Burn-out and thick-film firing trials in Noida.
Gold assaying & jewellery
Fire-assay cupellation at assaying and hallmarking centres in Dariba Kalan and Karol Bagh.
NABL & third-party testing labs
LOI, ash and gravimetric tests for clients in Okhla and Bawana.
Key Areas in Delhi Where Muffle Furnaces Are in Demand
We supply muffle furnaces across Delhi and its surrounding industrial belts. These are the hubs where demand is highest:
| Area | Industries & institutions | Typical muffle furnace use |
|---|---|---|
| Hauz Khas | IIT Delhi | Calcination, sintering, teaching labs |
| Pusa | CSIR-NPL and agricultural research labs | Calcination, sintering, teaching labs |
| Timarpur & Metcalfe House | DRDO laboratories | Alloy coupon heat treatment, materials QC |
| North Campus | University of Delhi science departments | Calcination, sintering, teaching labs |
| Okhla Industrial Area | Engineering, pharma and electronics units | Residue on ignition, sulphated ash, LOI |
| Naraina & Mayapuri | Engineering, metal and foundry units | Sand LOI, casting sample heat treatment |
| Bawana & Narela | Industrial and manufacturing units | LOI, ash, gravimetric tests |
| Dariba Kalan & Karol Bagh | Gold jewellery and assaying | Fire-assay cupellation, sample melting |
| Gurugram & Manesar (NCR) | Automotive OEMs and components | Hardening, tempering, burn-off of small parts |
| Noida & Greater Noida (NCR) | Electronics and mobile manufacturing | Burn-out, thick-film firing trials |
| Faridabad (NCR) | Engineering and auto component units | Hardening, tempering, burn-off of small parts |
Muffle Furnace Applications for Delhi Labs & Industries
| Laboratory applications | Industrial applications | Research & education |
|---|---|---|
| Ash & sulphated ash determination | Heat treatment of tools and dies | Calcination of catalysts and oxides |
| Loss on ignition (LOI) | Ceramic and glass testing | Sintering of ceramic pellets |
| Residue on ignition | Fire-assay cupellation | Annealing and phase studies |
| Gravimetric analysis | Raw-material and mineral QC | Material synthesis |
| Food & feed ash content | Burn-off and binder removal | Teaching laboratories |
Technical Specifications – Muffle Furnace
| Parameter | Specification / options |
|---|---|
| Maximum temperature | 1200°C / 1700°C / 1800°C models |
| Heating elements | Kanthal wire (up to 1200°C), MoSi2 (1700°C & 1800°C) |
| Temperature control | Digital PID / microprocessor-based, programmable options |
| Temperature sensor | Thermocouple selected to suit operating temperature |
| Chamber & insulation | Refractory / ceramic-fibre chamber with high-density insulation |
| Chamber capacity | Standard sizes and custom chambers as per requirement |
| Safety | Over-temperature protection and electrical safety provisions |
| Power supply | 230 V AC or 415 V AC, 50 Hz, depending on model |
| Mounting | Bench-top or floor-standing depending on size |
Specifications vary with model and configuration. See the full muffle furnace range for details.
Why Delhi Buyers Choose Shrinitha Scientific
- Built at our own works in Vasai East, Maharashtra, and dispatched by road to Delhi
- Visit and inspect your furnace at our works before dispatch
- ISO 9001:2015 certified manufacturing with pre-dispatch functional testing
- Custom builds — temperature, chamber size, controller
- Installation guidance, spares and service support for customers in Delhi
- Application-focused advice to match the furnace to your process
How to Order a Muffle Furnace in Delhi
1. Share your requirement
Tell us your maximum temperature, chamber size, sample type and heating cycle.
2. Specification & quotation
We recommend a model or custom design and send a technical offer.
3. Manufacturing & testing
Built at our Vasai works and tested before dispatch — you can attend the test.
4. Delivery to Delhi
Safely packed and delivered to your lab or plant, with installation guidance.
Muffle Furnace in Delhi – FAQs
1. Do you supply muffle furnaces in Delhi?
Yes. Shrinitha Scientific manufactures muffle furnaces at its own works in Vasai East, Palghar, and supplies them across Delhi and its industrial areas, including Hauz Khas, Pusa, Timarpur & Metcalfe House and North Campus.
2. What temperature ranges are available in your muffle furnaces?
Muffle furnaces are offered in models up to 1200°C, 1700°C and 1800°C. Up to 1200°C models use Kanthal resistance wire, while 1700°C and 1800°C models use molybdenum disilicide (MoSi2) heating elements.
3. Can I inspect the muffle furnace before it is dispatched to Delhi?
Yes. You are welcome to visit our works at Vasai East, Palghar, and see your furnace tested before it is packed and dispatched by road to Delhi.
4. Which muffle furnace is suitable for a university or research laboratory?
Most university labs choose a 1200°C muffle furnace for calcination and annealing. For ceramic and materials research, 1700°C and 1800°C models with programmable controllers are available.
5. Can you make a muffle furnace with a custom chamber size?
Yes. Chamber dimensions, maximum temperature, controller type, door arrangement and power supply (230 V or 415 V) can be customised to suit your application.
6. How do I get a muffle furnace price for delivery in Delhi?
Send us your maximum temperature, chamber size, sample type and heating cycle through the enquiry form or call +91 88284 43924. We will recommend a suitable model and share a quotation for delivery to your site in Delhi.
Need a Muffle Furnace in Delhi?
Tell us your maximum temperature, chamber size, sample type and heating cycle. Our team will recommend the right muffle furnace and share a quotation for delivery to your site in Delhi.