- PH: +91 8828443924
- Email: Response@ShrinithaFurnace.Com
Muffle Furnace Manufacturer & Supplier in Coimbatore
Coimbatore, Tamil Nadu
Shrinitha Scientific is a muffle furnace manufacturer supplying laboratories and industries across Coimbatore. Every furnace is built at our own manufacturing unit in Vasai East, Maharashtra, tested before dispatch, and delivered to Coimbatore with installation guidance and spares support.
Coimbatore is a major centre for pumps, motors, castings and textile machinery, with a large foundry cluster, the textile and knitwear industry of Coimbatore and Tiruppur, gold jewellery manufacturing, and engineering research at PSG Tech and Amrita. Many of them need a reliable muffle furnace for ashing, loss on ignition, calcination, sintering and heat treatment. We supply 1200°C, 1700°C and 1800°C muffle furnaces with digital PID or programmable controllers, built to the chamber size and heating cycle your work needs.
What is a Muffle Furnace?
A muffle furnace is an electrically heated, insulated chamber furnace in which the sample is heated without coming into contact with the heating elements or combustion products. That isolation gives clean, uniform and repeatable heating — which is why it is the standard instrument for ash determination, loss on ignition and high-temperature sample preparation.
Muffle Furnace Models Supplied in Coimbatore
Kanthal-wire heated. The everyday choice for ashing, loss on ignition, drying and routine QC.
MoSi2 heating elements for sintering, ceramic firing and high-temperature material research.
Top-end MoSi2 model for advanced ceramics, zirconia and alumina sintering and R&D work.
Prices shown are starting prices for the base configuration, ex-works Vasai, excluding GST. Final price depends on chamber size, controller and options. Each furnace is made to order and dispatched in 7–21 working days; delivery to Coimbatore takes 4–6 days and is included in the quote. As furnaces are custom-built, returns are not accepted; manufacturing defects are covered under our service support.
Who Uses Our Muffle Furnaces in Coimbatore
Foundries & castings
Sand and core LOI tests and heat treatment of casting samples in Kurichi and Malumichampatti.
Textile & dyeing units
Ash content of fibres and LOI of finishes and dyes in Coimbatore and Tiruppur.
Automotive & component makers
Hardening and tempering of small parts and binder burn-off trials at pump and motor makers.
Gold assaying & jewellery
Fire-assay cupellation at assaying and hallmarking centres at gold jewellery units.
Universities & research institutes
Calcination, sintering, annealing and teaching labs at PSG Tech and Amrita.
NABL & third-party testing labs
LOI, ash and gravimetric tests for clients across the city.
Key Areas in Coimbatore Where Muffle Furnaces Are in Demand
We supply muffle furnaces across Coimbatore and its surrounding industrial belts. These are the hubs where demand is highest:
| Area | Industries & institutions | Typical muffle furnace use |
|---|---|---|
| SIDCO Kurichi | Pumps, motors and foundry units | Sand LOI, casting sample heat treatment |
| Ganapathy & Chinnavedampatti | Engineering and wet-grinder makers | Sand LOI, casting sample heat treatment |
| Peelamedu | PSG Tech and engineering units | Calcination, sintering, teaching labs |
| Malumichampatti | Foundry and engineering units | Sand LOI, casting sample heat treatment |
| Saravanampatti | Electronics and IT parks | Burn-out, thick-film firing trials |
| Tiruppur (nearby) | Knitwear and textile dyeing | Fibre ash, dye and finish LOI |
| Ettimadai | Amrita Vishwa Vidyapeetham | Calcination, sintering, teaching labs |
| Big Bazaar Street | Gold jewellery manufacturing | Fire-assay cupellation, sample melting |
Muffle Furnace Applications for Coimbatore Labs & Industries
| Laboratory applications | Industrial applications | Research & education |
|---|---|---|
| Ash & sulphated ash determination | Heat treatment of tools and dies | Calcination of catalysts and oxides |
| Loss on ignition (LOI) | Ceramic and glass testing | Sintering of ceramic pellets |
| Residue on ignition | Fire-assay cupellation | Annealing and phase studies |
| Gravimetric analysis | Raw-material and mineral QC | Material synthesis |
| Food & feed ash content | Burn-off and binder removal | Teaching laboratories |
Technical Specifications – Muffle Furnace
| Parameter | Specification / options |
|---|---|
| Maximum temperature | 1200°C / 1700°C / 1800°C models |
| Heating elements | Kanthal wire (up to 1200°C), MoSi2 (1700°C & 1800°C) |
| Temperature control | Digital PID / microprocessor-based, programmable options |
| Temperature sensor | Thermocouple selected to suit operating temperature |
| Chamber & insulation | Refractory / ceramic-fibre chamber with high-density insulation |
| Chamber capacity | Standard sizes and custom chambers as per requirement |
| Safety | Over-temperature protection and electrical safety provisions |
| Power supply | 230 V AC or 415 V AC, 50 Hz, depending on model |
| Mounting | Bench-top or floor-standing depending on size |
Specifications vary with model and configuration. See the full muffle furnace range for details.
Why Coimbatore Buyers Choose Shrinitha Scientific
- Built at our own works in Vasai East, Maharashtra, and dispatched by road to Coimbatore
- Visit and inspect your furnace at our works before dispatch
- ISO 9001:2015 certified manufacturing with pre-dispatch functional testing
- Custom builds — temperature, chamber size, controller
- Installation guidance, spares and service support for customers in Coimbatore
- Application-focused advice to match the furnace to your process
How to Order a Muffle Furnace in Coimbatore
1. Share your requirement
Tell us your maximum temperature, chamber size, sample type and heating cycle.
2. Specification & quotation
We recommend a model or custom design and send a technical offer.
3. Manufacturing & testing
Built at our Vasai works and tested before dispatch — you can attend the test.
4. Delivery to Coimbatore
Safely packed and delivered to your lab or plant, with installation guidance.
Muffle Furnace in Coimbatore – FAQs
1. Do you supply muffle furnaces in Coimbatore?
Yes. Shrinitha Scientific manufactures muffle furnaces at its own works in Vasai East, Palghar, and supplies them across Coimbatore and its industrial areas, including SIDCO Kurichi, Ganapathy & Chinnavedampatti, Peelamedu and Malumichampatti.
2. What temperature ranges are available in your muffle furnaces?
Muffle furnaces are offered in models up to 1200°C, 1700°C and 1800°C. Up to 1200°C models use Kanthal resistance wire, while 1700°C and 1800°C models use molybdenum disilicide (MoSi2) heating elements.
3. Can I inspect the muffle furnace before it is dispatched to Coimbatore?
Yes. You are welcome to visit our works at Vasai East, Palghar, and see your furnace tested before it is packed and dispatched by road to Coimbatore.
4. Which muffle furnace is suitable for sand testing and heat treatment in a foundry lab?
A 1200°C muffle furnace covers sand and core LOI tests and heat treatment of casting samples. A larger chamber is recommended for bigger test bars.
5. Can you make a muffle furnace with a custom chamber size?
Yes. Chamber dimensions, maximum temperature, controller type, door arrangement and power supply (230 V or 415 V) can be customised to suit your application.
6. How do I get a muffle furnace price for delivery in Coimbatore?
Send us your maximum temperature, chamber size, sample type and heating cycle through the enquiry form or call +91 88284 43924. We will recommend a suitable model and share a quotation for delivery to your site in Coimbatore.
Need a Muffle Furnace in Coimbatore?
Tell us your maximum temperature, chamber size, sample type and heating cycle. Our team will recommend the right muffle furnace and share a quotation for delivery to your site in Coimbatore.